How to Clean Intellichlor Salt Cell

Emma

intellichlor salt cell cleaning

To keep your Intellichlor Salt Cell functioning well, start by turning off the power and removing the cell from the system. Look for buildup and debris, then clean it using a mild acid solution. Thoroughly rinse the cell, paying attention to hard-to-reach spots, and reinstall it securely. Test the system afterward to ensure proper functioning. For regular maintenance, check for buildup and debris monthly, clean with mild acid as needed, and monitor chlorine levels. By following these steps, you'll maintain your Intellichlor cell effectively and prolong its lifespan for optimal pool performance.

Importance of Cleaning Intellichlor Cell

Regularly cleaning your Intellichlor cell is crucial for maintaining its efficiency and prolonging its lifespan.

Over time, mineral deposits and buildup can accumulate on the cell plates, hindering the electrolysis process that converts salt into chlorine for your pool. By cleaning the cell regularly, you ensure that it continues to function optimally, providing you with clean and safe pool water.

Neglecting to clean your Intellichlor cell can lead to decreased chlorine production, potentially resulting in unhygienic pool water that's unsafe for swimming.

Moreover, a dirty cell may cause your Intellichlor system to work harder, increasing energy consumption and potentially leading to costly repairs down the line. By incorporating regular cleaning into your pool maintenance routine, you not only save on energy costs but also extend the lifespan of your Intellichlor cell, ultimately saving you money in the long run.

Make it a habit to clean your Intellichlor cell according to the manufacturer's recommendations to enjoy a clean and well-maintained pool all season long.

Gather Necessary Supplies

To effectively clean your Intellichlor cell, the first step is to gather the necessary supplies for the task. Ensuring you have all the required items before starting will make the cleaning process smoother and more efficient.

Here are the essential supplies you'll need:

  • Rubber gloves: Protect your hands from any harsh chemicals during the cleaning process.
  • Safety goggles: Shield your eyes from splashing cleaning solutions.
  • Plastic container: Use this to create a cleaning solution for soaking the cell.
  • Water hose: Necessary for rinsing off the salt cell after cleaning.

Having these supplies on hand will help you clean your Intellichlor salt cell effectively and maintain its optimal performance.

Next, we'll discuss how to safely turn off the power to the cell before proceeding with the cleaning process.

Turn Off Power to Cell

Ensure the power to the Intellichlor cell is switched off before proceeding with the cleaning process. This step is crucial for your safety and to prevent any damage to the cell during cleaning.

To turn off the power, locate the circuit breaker or power switch that controls the Intellichlor system. Switch the power off to ensure there's no electricity running to the cell.

Before you start cleaning the cell, it's important to verify that the power is completely off. Double-check by using a voltage tester to ensure there's no electrical current present. It's always better to be safe than sorry when working with electrical components.

Remove Intellichlor Cell From System

You can safely remove the Intellichlor cell from the system by following these steps.

Turn off the Power: Before attempting to remove the cell, ensure that the power to the system is completely turned off to prevent any electrical mishaps.

Locate the Cell Housing: Find the Intellichlor cell housing within your system. It's usually near the pump and filter.

Disconnect the Unions: Use a wrench to loosen the unions on either side of the cell to detach it from the plumbing.

Carefully Remove the Cell: Once the unions are loose, gently pull the cell out of the housing, being cautious not to damage any of the components.

Place the Cell in a Safe Location: After removal, set the Intellichlor cell in a secure area away from the cleaning area to avoid any accidental damage.

Following these steps will ensure that you safely remove the Intellichlor cell from the system for cleaning or maintenance purposes.

Inspect for Build-Up and Debris

Now, take a moment to inspect your Intellichlor salt cell for any visible residue or debris.

If you notice any blockages, make sure to remove them carefully.

Then, thoroughly rinse the cell with water to ensure it's clean and ready for the next steps.

Check for Visible Residue

Inspect the Intellichlor salt cell for any visible residue, focusing on build-up and debris. Over time, residue can accumulate in the salt cell, affecting its performance and efficiency. By checking for visible residue regularly, you can ensure that your salt cell continues to work effectively.

Here are some key points to consider when checking for visible residue:

  • Look for white or brownish build-up on the cell plates.
  • Inspect the connections for any signs of corrosion or debris accumulation.
  • Check the cell housing for any dirt or debris that may have entered.
  • Pay attention to any strange odors coming from the cell, as this could indicate a build-up of organic matter.

Remove Any Blockages

To effectively clean your Intellichlor salt cell, begin by carefully examining for any blockages caused by build-up and debris. Over time, residue and debris can accumulate in the salt cell, obstructing the flow of water and reducing its efficiency. Inspect the cell thoroughly, paying close attention to areas where blockages are most likely to occur, such as the plates and connections.

Look for any visible signs of build-up, such as white scale or dark deposits, which can indicate a blockage. Use a flashlight to help you see clearly into the cell and identify any areas that may be clogged. If you notice any blockages, it's essential to address them promptly to ensure optimal performance of your salt cell.

Once you have identified the blockages, follow the manufacturer's instructions on how to safely remove them. Avoid using sharp objects that could damage the cell and instead opt for gentle cleaning tools like a soft brush or a cleaning solution recommended for salt cells.

Rinse Thoroughly With Water

Thoroughly rinse the Intellichlor salt cell with water to remove any remaining build-up or debris. After cleaning out any blockages, this step is crucial to ensure optimal performance of your salt cell.

Here are some key points to consider when rinsing the salt cell:

  • Use a High-Pressure Hose: A high-pressure hose helps to dislodge any stubborn build-up within the cell.
  • Inspect for Residual Build-Up: Check carefully for any lingering deposits that may require additional attention.
  • Focus on Nooks and Crannies: Pay particular attention to hard-to-reach areas where build-up tends to accumulate.
  • Repeat if Necessary: If you notice any remaining debris, repeat the rinsing process until the cell is thoroughly clean.

Clean Cell With Acid Solution

Consider using a diluted acid solution to effectively clean your Intellichlor salt cell. Over time, mineral deposits and scale can build up inside the cell, hindering its performance.

To address this, create a cleaning solution by mixing one part muriatic acid with five parts water in a plastic container. Remember to always add acid to water, not the other way around, to prevent splashing or spattering.

Next, carefully remove the salt cell from the system following the manufacturer's instructions. Submerge the cell in the diluted acid solution, ensuring that all the components are covered. Let it soak for about 15-30 minutes to allow the acid to dissolve the built-up deposits. During this time, you may notice bubbles forming as the acid works to clean the cell.

After soaking, use a soft brush to gently scrub the cell, focusing on areas with stubborn deposits. Be cautious not to use a metal brush as it can damage the cell.

Once you've scrubbed the cell, rinse it thoroughly with water to remove any remaining acid solution before reinstalling it back into the system.

Rinse Intellichlor Cell Thoroughly

When rinsing your Intellichlor cell, make sure to follow the proper technique to remove all residual cleaning solution.

Thorough rinsing is crucial to ensure the cell is free of any remaining acid or debris.

Neglecting this step could lead to damage and inefficiency in the functioning of your salt cell.

Proper Rinsing Technique

To ensure effective cleaning, thoroughly rinsing the Intellichlor cell after the initial cleaning steps is essential. After completing the cleaning process, follow these steps to properly rinse the cell:

  • Use a Hose: Rinse the cell using a regular garden hose to remove any remaining cleaning solution or debris.
  • Inspect the Cell: Take a moment to visually inspect the cell to ensure all cleaning residue has been washed away.
  • Focus on Each Plate: Direct the water stream to flow through each plate of the cell individually to guarantee thorough rinsing.
  • Check for Blockages: Verify that there are no blockages in the cell's ports or connections by running water through them.

Following these steps will help maintain the Intellichlor cell in optimal condition and ensure its longevity and efficiency.

Importance of Thorough Rinsing

Thorough rinsing of the Intellichlor cell is crucial for removing all cleaning residue and ensuring optimal performance. After completing the cleaning process, take the time to thoroughly rinse the cell with clean water. This step is vital to wash away any remaining cleaning solution or debris that may still be clinging to the cell plates.

Neglecting to rinse the cell properly can lead to issues such as reduced chlorine production and potential damage to the cell. By ensuring a comprehensive rinse, you're helping to maintain the efficiency and longevity of your Intellichlor salt cell.

To achieve a thorough rinse, make sure to flush the cell with water for an adequate amount of time. A good indicator that the rinsing process is complete is when the water running through the cell appears clear and free of any cleaning residue.

Reinstall Cell and Test System

You may now proceed to reinstall the salt cell and test the system. After cleaning the Intellichlor salt cell, the next step is crucial to ensure proper functioning of your system. Follow these steps to complete the process efficiently:

  • Reinstall the Cell Carefully: Align the salt cell properly and secure it in place following the manufacturer's instructions.
  • Reconnect All Connections: Make sure all electrical connections are securely attached to the salt cell and the system.
  • Check for Leaks: Inspect the area around the salt cell for any leaks or drips to prevent water damage.
  • Reset the System: If necessary, reset the Intellichlor system to ensure it recognizes the cleaned salt cell.

Regular Maintenance Tips

After completing the reinstall and testing process, maintaining your Intellichlor salt cell regularly is key to ensuring optimal performance and longevity.

To keep your salt cell in top condition, remember to check the cell at least once a month for any buildup or debris. Inspect the cell plates for scale formation and clean them if necessary using a mild acid solution. Additionally, ensure that the salt levels in your pool are within the recommended range to prevent any strain on the cell.

It is essential to monitor the salt cell's chlorine production regularly and adjust the output as needed based on your pool usage and environmental conditions.

Regularly inspect the cell for any signs of wear and tear, such as corrosion or damage to the housing, and address these issues promptly to prevent further damage.